Hard and durable, crystal clear with cross linked protection - fast drying, it protects a wide range of surfaces. This high quality cross linked lacquer dries to a hard, crystal clear satin or high gloss film, with extremely good sanding properties and is specially formulated to bond to a wide range of surfaces - it can also be used as a multi surface primer.
Ideal for - metal surfaces , laminate, timber surfaces , tile, ceramic, glass, plastics
- Very hard and durable finish
- 1-2 hour drying time
- Water resistant
- Stain resistant
- Heat resistant
- Water wash up
All surfaces must be clean and free from dust, dirt, oil and contamination.
Timber: Remove oils/resins from oily hardwoods and resinous softwoods. Sand to a smooth finish and remove all dust.
Ensure the product is well mixed but do not shake. Use a good quality synthetic varnish brush and apply evenly using light brush strokes. Apply the first coat and allow to dry. To prime porous surfaces dilute with 10% water. Apply one or two further coats.
Always apply to a test area before starting work. Do not apply over uncured oil based paint. When applied over emulsion/latex paint, it is possible that the lacquer can draw certain stains through the paint, which would not otherwise be visible.
Protect from extremes of temperature during storage and application.
Health, Safety and the Environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.